Help in Reading Spark Plug

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Morocco

Member
Joined
Oct 9, 2007
Messages
13
Reaction score
0
Location
New Plymouth,New Zealand
Can any of you cleaver buggers tell me how to read a spark plug to see if my bike is running rich or lean? and how to adjust the problem, ive got a kei hin carb (standard on the chinese bike) also pictures will be dam helpful to. thanks guys
 
if its black to rich if its gray to lean should be brown move your e clip up to make it lean or down to make it rich
 
There is no point in just taking out your spark plug and reading it. You need to do it in a controlled manner.

You need to kill the engine with the throttle wide open and with the engine under a moderate load (take a spark plug socket in your pocket) after about 10 seconds of flat chat wide open throttle. If it gives a bad reading on this run you need to change your main jet.

You need to do the exact same thing at half throttle and this reading is corrected by the Eclip.

If you do a search you will find this in much more detail in another thread
 

Latest posts

Back
Top