1. If you are having issues logging back into the forum since the s/w transfer please use the CONTACT US in the bottom left corner of the main page. This will get you in contact with someone who will help you log back in.
    Dismiss Notice

Loncin 125cc with Electric Start

Discussion in 'Carby & Tuning' started by Wlfpck, Jan 2, 2019.

Mini Dirt Bikes

Help Support Mini Dirt Bikes:

  1. Jan 2, 2019 #1

    Wlfpck

    Wlfpck

    Wlfpck

    Member

    Joined:
    Sep 2, 2017
    Messages:
    8
    Likes Received:
    0
    Loncin 125cc with E-Start with Mikunki VM22-133

    I have a Icebear Fuerza (Grom Clone) that has the Loncin 125cc with Electric Start.

    I have a Mikuni VM22-133 carb and an exhaust.

    I'm pretty much at 60-100' sea level. Does anyone have any recommendations as to what to start the jet sizing at?

    My pilot is at 30 and my main is at 110. Needle is right in the middle. The engine idles fine. However, when I crank the throttle fast, it sputters and dies. If I ride around normally (say with traffic), it rides fine and I have no problem accelerating through the gears and up to speed. The only issue is when I crank the throttle.
     

Share This Page



arrow_white