Recent content by Hoolign

Yeah they are the same thing but were brought from different guys and the orion had allow parts and 25mm carby

Ok guys so i have had a atomik and a orion for about 1 month now and heres the comparison The orion has had not a single problem, the chain has needed re-tensioning a few times but thats normal for these bikes. i did have a problem where i didnt unclamp the gear box breather pipe from shiping...

what gap distance should it be set at? what about ngk plugs? any good, bit cheaper.

just want to know what a good spark plug is and if it makes any difference from the original chinese one?

I just tilted my Handle bars forward now they have a much better longer reach on them

Hey guys, all fixed, all it was was that the breather pipe was zip tied shut still from shipping, it poped out the front sprocket rubber seal, so i pulled it apart and popped it back in. all fixed, flogged it for 2 hours straight over jumps and rocky terrain up really steep offroad mountain...

ill check it to see if its blocked,,, damn i hope i can get this sprocket off, the bikes not even a week old! besides the leak, the bike is awesome, i will have problem replacing the gaskets, just getting some of the bits off to get to it seem to be the challenge, i gotta get it going by...

yeah, i know where the oil is comming from already, the gasket in the gearbox has a hole blown in it,,, why is there no breather hole on their to let out the air pressure, if there was it wouldnt have blown the hole in the gasket, i dont know much about bikes but i know a lot about cars, i have...

Hey guys, so i was riding this arvo noticed a few things. the engine when warm makes a whiring noise sounds like something spinning really fast. after a while it got noisyer then, there was a PSSSSSHHHHT sharp noise like presure being released, lasted about 1 second, now i have oil dripping from...

yeah thats the sporcket i was looking at, with the chain, cant we just take some links out to make it fit?? no i havent taken off the choke, how do you do it? and dont you need the choke to start the bike cold? ive had the bike 4 days and have only been able to ride it for 5 min cause its been...

yeah, but i can drill some additional holes if the holes are slightly wrong as there is a bit of spare metal to drill into around the existing holes, i can link the actual item but there are some selling for $39 4 stud 37 tooth, just type SPROCKET in ebay search, make sure its 4 stud

im getting mine from ebay, theres heaps, just make sure that the stud pattern fits ok, a lot are 3 stud pattern

cool thanks, seems fine, also what about the chain? would i have to buy a new one? or can i easily take some links out of my current one?

Hey guys, just wondering, i got a orion pro 125cc, it has 47 tooth back sprocket, im thinking of going to a 40 and there is was too much acceleration in low gears and i would prefer to take that and spread it out for some more top end so that first gear will be actually useful. at the moment it...

mate cant you just go buy a high tensile bolt from the local hardwarware store??