Search results

Well today i took the bike out spent the whole time trying different jets to tune it. After several different combinations all with the needle clip left on middle position iv settled on 36 pilot and 96 main with idle mixture screw 1/4 turn out. Seems to be the most responsive and clean reving...

All good, I've been nothing but stoked with the help I've received from people on here to date. Keep up the great job guys and I'll let you know how I go once I can find time to look at the bike,

Dont look at me....i love all the info you 2 have given me just havent had a chance to have a look at the bike yet. I gave both good rep and if i gave negetive it was by accident but im pretty sure its hard to select disapprove without clicking it...

Sounds like could be a door opening for mini racing in SA finally!! Rumour has it a few Mini Menace sponsors have chipped in some nice lil goodies for just entering and having a crack. Should be an awesome day.

I have considered putting the 38 back in to see what happens as i changed both the main from 100 to 98 and the pilot from 38 to 40 in one step.

Didn't come with a boot so i made my own using some soft silicon vacuum hose and tight zipties.

Ok i'll give that a shot and see what happens but im still interested in sealing as it would also ensure no water or dirt can get in there.

Ok i've fitted a 26mm Flatslide from DHZ to my stock lifan 150 and after some efforts at tuning its getting rather hot and back firing flames when decelerating. So im guessing lean but im running- K98 main (originally had K100 fitted but had no response at all and very boggy) K40...

My mixture screw seems to only be 1/2 turn out from seat as well. E Clip on position 1 below middle. If i turn the mixture out more it becomes duller in note and tends to hiccup through the carby a lil at idle. Would i be right in thinking the E clip needs to be in the middle and then the...

Iv managed to get it running pretty sweet after an hour or so. 2nd to bottom with E clip, mixture screw half a turn out. See how it goes cold starting tomorrow. Will do finer tuning via plug chops to see if the jetting is in need of changing once i can get out somewhere i can do top gear runs...

The adaptor seemed nice and flat as i noticed it looked as though it had been over a sanding block but will spray a lil WD40 round and see if there is a leak first thing tomorrow.

Well while waiting for the OKO 26 Flatslide to arrive in the post i decided to look into the lacking compression a lil more. After checking the valve clearances I pulled the head off for a look... I found that the exhaust valve had a few large carbon deposits on the sealing edge which was...

Thanks for the confirmation and info. :D

Yep that's me in party mode playin safety Sam.

Anyone with experience or knowledge in this??

My 30mm Fakuni on my pit pro 150 is going in the bin, I rebuilt and cleaned it several times and tried every adjustment but it just didnt want to 'play the game' even though it was fine for the first 18 months before the bike started playing up. I'd suggest if its not running right just get it...

Can anyone tell me if a Lifan 140 head will definitely bolt straight onto a Lifan 150 barrel and cases using the 150 timing chain, cam, head gasket and sprocket?? And if so what are the differences, such as valve sizes, combustion chamber cm3 , cam specs, valve lift, etc. Are all the parts...

26mm flatslide be the size i want? I dont plan on building a monster of a motor just something usable.

26mm flatslide be the size i want? I dont plan on building a monster of a motor just something usable.

Ok finally got out for a ride and iv now found its running rich or at least the plug is black sooty looking after a top gear WOT run then motor cut. Bike is rideable but very slugish and boggy with pretty much no top end. So im guessing throw carby in the bin and get an OKO Flatslide. I managed...