26mm OKO flatside

[isaac133]

Hey guys I know this may be a very big ask but if at all possible would anyone be able to give me a step by step procedure of how to remove a Molkt 26mm off a nitrous 150 yx engine and replace it with a OKO 26mm flat side, I am still in the noob stage of working on my bike and would appreciate any help with this!

Thanks so much guys!

Ps: pictures would help greatly

 

[Carlts]

Hey mate,

DO you already have the :

1. OKO 26mm Carby
2. 48mm Air filter
3. Rubber Adaptor
4. 26mm Manifold.

 

[isaac133]

Nah mate, I'm gonna order the 26mm OKO flatside kit from the dhz website tomorrow Arvo

 

[isaac133]

Also this is the kit I'm looking at buying, is this all I will need?

http://www.dhz.com.au/buy/oko-26mm-flateslide-race-carby-kit/CARB-05-26-KIT

 

[Carlts]

Yep thats the lot, just ask them to send the right length throttle cable for your bike. Let them know if its a standard or joker throttle and if its a 1/8 or 1/4 or 1/2 turn throttle.

 

[isaac133]

Sweet as! So back on topic do you know the step by step method of doing this, if so I need a bit of help with understanding this, thanks!