Anybody in the Illawarra area want to tune my 125 atomik

[jimbo jones]

I bought a new Mikuni carbi and a #20 pilot jet but I can't get my hands in to adjust the mixture screw dose anyone want to it for me I will pay cash or beer.

 

[zwebx]

either buy a flex jet.. or turn the carby over and doo it by arse..
there is a reason i dont run that carb... on any of my bikes

 

[Blender]

the best way to tune the mikuni 22/26's is to turn the mixture screw all the way in, then 2 turns out. ur bike should start now, but it will most likely be running rich. another 1-1.5 turn should have it running pretty sweet, it takes a while, but in the end its worth it.

 

[8r3nd0]

Cut down a smaller screw driver and get it up there.
I work in Bomaderry mate I could help you out if all else fails, wouldn't charge ya.

 

[jimbo jones]

Cut down a smaller screw driver and get it up there.
I work in Bomaderry mate I could help you out if all else fails, wouldn't charge ya.

I have tried everything and I can't get it to run right Ill pm you my number