carb question on drain screw

[Hock]

hey guys, i attached a picture. is this my drain screw for the carb? i got a mikuni 30mm stock carb that comes on dhz dpro 160?


thanks heaps!

 

[THUMPINOZ]

Yeah thats the drain screw

30mm? I have a mikuni 24mm that is bigger than that?

 

[Hock]

hmm i dunno thats what it says on the dhz website. it says "Mikuni 30mm Racing Carburetor"

 

[Hock]

is it normal for the drain screw to be extremely tight? nearly stripped it...gonna replace it with higher quality

 

[THUMPINOZ]

Its possible? Good luck getting it out

 

[Hock]

What tyre pressure u recomend running tyres at mate? Wheels say max 40 but that seems a bit high

 

[THUMPINOZ]

Bit off track but if you are running in mud or sand & you dont weight too much? you can run them around 15 PSI but gotta be careful you dont spin the tyre on the rims & rip the valve/s out, Around 20-30 should be fine depending on your weight?

Cheaper (Thinner wall) tyres may need a little bit more pressure

 

[Hock]

I weigh 68kg so ill run em around 28. Gonna be using em on a farm ( not sandy track)

 

[Hock]

They are cheap stock tyres