CT110 swingarm upgrade

[Towers]

Does anyone know if it's possible to fit a different swing arm to a CT110 so I can run new wheels and discs?

 

[WILL_S]

Yes it ts possible,but requies modifiying.Building one from scratch might be easier.You can fit disc brakes on the standard swingarm.I'm getting one built, it'll be about 2" over but am going to retaining drum brake at this stage,havn't decided on steel or alloy.

 

[Towers]

Oh yeh sweet how much that costin ya man

 

[Towers]

With the standard swing arm did you mean making brakets for the caliper and welding to the swingarm or somethin along those lines

 

[WILL_S]

With the standard swing arm did you mean making brakets for the caliper and welding to the swingarm or somethin along those lines

The caliper would hang from the axle on a bracket. A stay mounted to the arm, weld or use a existing mounting point for the old drum brake stay.
Cost for the custom no idea a mates doing it.
Out of interest why the disc?I know the drum set up is a pain if you get a flat but they stop ok.

 

[Towers]

just for somethin to do ay