dhz mikuni 30mm carby probs

[graham]

ok brought a dhz 140cc with 30mm mikuni carby was running great no problems,then all of a sudon is started breaking down on me flutering and what not.

snitchy told me to move the needle clip to the bottom ,well i checked that and it was already at the bottom so i checked the bowl for water or dirt,negative for both.

took the jets out cheked and cleaned them they were fine put it back together,

drained my tank tryed different type of fuel ,,still same problem




HELP please


note:the bike haqs less then 3 hours ride time on it

 

[stupidability]

adjudt ya float level and cain the shit outa it she'll come good.

 

[graham]

how do i adjust the float level ?

 

[Sidney]

bend it slightly up or down so it sits in the middle of the bowl.

(I think)

 

[SnItChY]

yes try that graham with the float level i cant think of anythin else

have looked at the choke made sure it aint jaming on
on that bike lever down choke off

i have found with zacs bike the choke lever was loose and was vibrating
it self on at times

have a look at that ,run premium fuel,aint much else other than fule line blockage but id doupt it

try moveing that sir clip up 1 level on to the second notch give that a go

hope ya fix it dude coz i wanna race ya on me track and you'll need your bike tiptop as my bikes are ready to race lol