bertomuggs
New Member
- Joined
- Oct 16, 2014
- Messages
- 1
- Reaction score
- 1
ITEM:
CRF50 Race Bike Takagawa 124cc DOHC BBR Perimeter Frame Marzocchi 35mm Forks
CONDITION:
LIKE NEW
LOCATION:
Yorba Linda, CA, USA
REASON FOR SELLING:
To pay for an adoption
PRICE AND CONDITIONS:
$3,499.00 OFFERS ACCEPTED!!!
I custom built this bike from scratch and it has sit in my garage for the past few years. Its only been up and down the street a few times. This is a $10,000+ full Race bike with over 16HP!!!
This same setup has won the World Minis multiple times!!! It is scary fast!!!
EXTRA INFO:
Key components include:
BBR Perimeter frame kit, Elka Rear Shock, Front and Rear hydraulic Disc brakes, Marzocchi 35mm Works Fork kit, Takagawa 124cc DOHC Stage 3 Big Bore/Stroker Kit, Two Brothers exhaust Kit, 3 Speed Manual Transmission/Clutch, Pro Taper Handlebars
---------------------------------------------------------------------------------------------
*Perimeter Frame Kit MSRP-$3,299.95
The BBR Perimeter Frame Kit is the ultimate upgrade for your XR/CRF50. An engineering masterpiece with the results to back it up. This frame has won numerous 50cc titles in America and around the world: Langtown, White Bros. World Championship, Screwy-Dilla, Sweet Bud, Vegas MiniMoto SX, Texas MiniMoto, Northwest Indoor Championship, Australia National Championship, and many more. The unique frame and swingarm design provides superior handling and eliminates the motor as a stress member of the frame. Broken motor cases and twitchy handling are a thing of the past! 100% engineered, machined, welded, heat-treated and tested in the USA. No other frame on the market even comes close.
-Patented BBR perimeter frame design
-6061 aluminum twin spar construction 2" longer than stock
-6061 Billet adjustable SuperComp Swingarm 3" longer than stock
-8" of rear wheel travel utilizing a one-of-a-kind BBR SuperShock (by Elka), custom-built specifically for the BBR Perimeter frame. It is fully rebuildable, uses standard size valving and shims and has a giant 16mm shaft. It also provides adjustable compression and rebound with optional spring rates.
-Tapered steering bearings pre-installed for easy assembly
-Brushed aluminum finish
-Complete Frame Kit includes: frame, subframe, swingarm, shock, custom tank, footpeg mounts, carb manifold adapter, chain guide and BBR billet gas cap.
---------------------------------------------------------------------------------------------
*Takagawa 124cc DOHC kit MSRP-$4,899.99
-Takegawa 124cc DOHC Bore Up Kit
-Mikuni VM26 DOHC Carburetor with Air Filter
-NGK CR8E Spark Plug
-Takegawa Hyper CDI Box
-Takegawa Super Oil Pump
-Takegawa Billet Oil Cooler for Super Head
-Takegawa Oil Cooler Adapter (up)
-Takegawa 3 speed Transmission and Manual Clutch Complete Kit
-Two Brothers Racing DOHC Big Bore Exhaust System.
---------------------------------------------------------------------------------------------
*Marzocchi Front Fork Kit MSRP-$1,350.00
These forks are true motorcycle forks manufactured by a motorcycle fork manufacturer (Marzocchi). They represent the "state-of-the-art" in motorcycle suspension. Gold nitride, steel lower tubes are super strong and stand up to the mud and punishment of motocross.
-35mm upside down design
-5.5 inches of travel
-Independent compression and rebound damping adjusters
-Gold nitride coated lower tubes with carbon fiber guards
-Adjustable spring preload
-CNC Machined tripleclamp set and stainless steel axle/nut
-Front disc brake system
---------------------------------------------------------------------------------------------
*BBR Rear Disc brake kit MSRP-$549.95
The BBR Rear Disc Brake Kit for the CRF/XR50 is the best in the industry. This is a real motorcycle brake developed from the ground up for the CRF/XR50. Super strong with unbelievable pedal feel. This is the ultimate fix for your broken rear hub blues. Includes billet aluminum hub, full motorcycle style brake system, and billet aluminum brake pedal.
-1 piece billet aluminum hub.
-Ultra tough with 3 bearing design.
-Thick motorcycle brake rotor.
-Full hydraulic motorcycle mini brake caliper and master cylinder (NOT mountain bike brakes).
-Billet brake pedal with (3 position) replaceable tip.
PICTURES:
CRF50 Race Bike Takagawa 124cc DOHC BBR Perimeter Frame Marzocchi 35mm Forks
CONDITION:
LIKE NEW
LOCATION:
Yorba Linda, CA, USA
REASON FOR SELLING:
To pay for an adoption
PRICE AND CONDITIONS:
$3,499.00 OFFERS ACCEPTED!!!
I custom built this bike from scratch and it has sit in my garage for the past few years. Its only been up and down the street a few times. This is a $10,000+ full Race bike with over 16HP!!!
This same setup has won the World Minis multiple times!!! It is scary fast!!!
EXTRA INFO:
Key components include:
BBR Perimeter frame kit, Elka Rear Shock, Front and Rear hydraulic Disc brakes, Marzocchi 35mm Works Fork kit, Takagawa 124cc DOHC Stage 3 Big Bore/Stroker Kit, Two Brothers exhaust Kit, 3 Speed Manual Transmission/Clutch, Pro Taper Handlebars
---------------------------------------------------------------------------------------------
*Perimeter Frame Kit MSRP-$3,299.95
The BBR Perimeter Frame Kit is the ultimate upgrade for your XR/CRF50. An engineering masterpiece with the results to back it up. This frame has won numerous 50cc titles in America and around the world: Langtown, White Bros. World Championship, Screwy-Dilla, Sweet Bud, Vegas MiniMoto SX, Texas MiniMoto, Northwest Indoor Championship, Australia National Championship, and many more. The unique frame and swingarm design provides superior handling and eliminates the motor as a stress member of the frame. Broken motor cases and twitchy handling are a thing of the past! 100% engineered, machined, welded, heat-treated and tested in the USA. No other frame on the market even comes close.
-Patented BBR perimeter frame design
-6061 aluminum twin spar construction 2" longer than stock
-6061 Billet adjustable SuperComp Swingarm 3" longer than stock
-8" of rear wheel travel utilizing a one-of-a-kind BBR SuperShock (by Elka), custom-built specifically for the BBR Perimeter frame. It is fully rebuildable, uses standard size valving and shims and has a giant 16mm shaft. It also provides adjustable compression and rebound with optional spring rates.
-Tapered steering bearings pre-installed for easy assembly
-Brushed aluminum finish
-Complete Frame Kit includes: frame, subframe, swingarm, shock, custom tank, footpeg mounts, carb manifold adapter, chain guide and BBR billet gas cap.
---------------------------------------------------------------------------------------------
*Takagawa 124cc DOHC kit MSRP-$4,899.99
-Takegawa 124cc DOHC Bore Up Kit
-Mikuni VM26 DOHC Carburetor with Air Filter
-NGK CR8E Spark Plug
-Takegawa Hyper CDI Box
-Takegawa Super Oil Pump
-Takegawa Billet Oil Cooler for Super Head
-Takegawa Oil Cooler Adapter (up)
-Takegawa 3 speed Transmission and Manual Clutch Complete Kit
-Two Brothers Racing DOHC Big Bore Exhaust System.
---------------------------------------------------------------------------------------------
*Marzocchi Front Fork Kit MSRP-$1,350.00
These forks are true motorcycle forks manufactured by a motorcycle fork manufacturer (Marzocchi). They represent the "state-of-the-art" in motorcycle suspension. Gold nitride, steel lower tubes are super strong and stand up to the mud and punishment of motocross.
-35mm upside down design
-5.5 inches of travel
-Independent compression and rebound damping adjusters
-Gold nitride coated lower tubes with carbon fiber guards
-Adjustable spring preload
-CNC Machined tripleclamp set and stainless steel axle/nut
-Front disc brake system
---------------------------------------------------------------------------------------------
*BBR Rear Disc brake kit MSRP-$549.95
The BBR Rear Disc Brake Kit for the CRF/XR50 is the best in the industry. This is a real motorcycle brake developed from the ground up for the CRF/XR50. Super strong with unbelievable pedal feel. This is the ultimate fix for your broken rear hub blues. Includes billet aluminum hub, full motorcycle style brake system, and billet aluminum brake pedal.
-1 piece billet aluminum hub.
-Ultra tough with 3 bearing design.
-Thick motorcycle brake rotor.
-Full hydraulic motorcycle mini brake caliper and master cylinder (NOT mountain bike brakes).
-Billet brake pedal with (3 position) replaceable tip.
PICTURES:
