handle bars again...... psto tl140

[ROLLAS13]

im looking at getting new bars for the bike, and im looking at getting these, just something cheaps to start http://www.motosport.com/AU/dirtbike/TURNER-BARS-OVERSIZED-118 . but i dont understand the size chart haha. would the mini bars be ok or do i need big bike ones.

any help would be appreciated thanks

 

[motodevo]

everyone preferences are different, best to get out the tape measure and work out whats going to work for you. If you can go to a bike shop try some out and see what feels good and take some sneaky measurements of what you want. Width=end to end width, Rise=how high they come up from the clamps,Pullback=how far they come back towards you from the riser

 

[Carlts]

One more thing to check will be bar diameter:

Fat bars require different clamps (1 1/8):
http://www.dhz.com.au/buy/pitsterpro-1-1-8-handle-bar-clamp-kit/PITSTER-20.1-18

Standard (7/8):
http://www.dhz.com.au/buy/pitsterpro-7-8-handle-bar-clamp-kit/PITSTER-20.78

 

[ROLLAS13]

One more thing to check will be bar diameter:

Fat bars require different clamps (1 1/8):
http://www.dhz.com.au/buy/pitsterpro-1-1-8-handle-bar-clamp-kit/PITSTER-20.1-18

Standard (7/8):
http://www.dhz.com.au/buy/pitsterpro-7-8-handle-bar-clamp-kit/PITSTER-20.78

Yeah mate I realised that haha when I was looking at pro tapers on there Website.

everyone preferences are different, best to get out the tape measure and work out whats going to work for you. If you can go to a bike shop try some out and see what feels good and take some sneaky measurements of what you want. Width=end to end width, Rise=how high they come up from the clamps,Pullback=how far they come back towards you from the riser

Yeah I might have to mate thanks for the idea