help plz

[tas]

hey i just got my new bike and im haveing a bit of trouble starting it i had it going last night so i know it runs. i put the switch on the fuel on and the choke/ but to day im haveing a bit of trouble starting it. when i start it am i ment to give it a few revs or not? thanks

 

[TDR]

I usually put the choke on half way give it a tinkle of throttle and kick it then it usually starts if that doesn't work check your spark plug... if it's wet dry it and with sand paper lightly clean in between the slide electrode and center electrode then check the gap between the slide electrode and center electrode and make sure the gap is 0.8mm also try starting it with the choke off and give it some revs and kick her over

If your wondering what the slide electrode and center electrode is have a look at this diagram

http://media.wiley.com/Lux/87/131087.image1.jpg

 

[MiniFighter]

just FYI std plug gap is 0.8mm not 1mm. you shouldnt need to adjust it.

 

[TDR]

OH Yeah lol sorry i got confused with something else don't worry
thanks for correcting me minifighter!

 

[tas]

yeah i got it now thanks i just needed some revs haha

 

[TDR]

kool glad it helped mate

 

[----M@TT----]

If its a 150, try kicking it with the throttle fully open.

 

[tas]

i also think it because i keep on fluding it? yeah its a 150