Kill Switch

[Mitchy]

Hey guys.
was wondering if you could turn your kill switch into a saftey switch that can stop the bike turning on just like a saftey switch. so get a new switch that you flick to turn the bike on so you can kick it then flick it again to turn it off. does anyone get me. would you put it in the same plugs that the kill switch goes into. or would you have to cut wires and stuff. can some one help me
thanks

 

[Franky]

Hey, Im not quite sure, I think if you just hooked it up it would work, but you would be best just going to a Motor bike shop ( any ) and asking them if it would work.
Franky.

 

[nvd20l]

Either that or an auto electrician.

 

[RabidDog12345]

if you got a orion... it should have a kill switch which is on/off
if u have a push button kill... then just get a toggle switch and and the 2 wires that go into the kill switch put them through the toggle switch and when the switch is on the on position the bike wont start.. and when its on the off position it will start

 

[mjc85]

Just swap the wires in the plug, that should work