my 125 has gear problems

[in_deep]

Ok so im new to this. I am having trouble putting my bike into neutral when it is turned off but still hot, i can get it into neutral eventually after half an hour, but then it will click back into gear when i roll it so i have to spend another half an hour trying to find neutral and there's been a few times where its clicked into gear while in idle

oh and i all so snapped both chain tension screws

 

[matty_77]

Have you checked that the front sprocket isnt stripped of teeth? also is the gear patter 1 down, 3 up?

 

[in_deep]

no i haven't checked to see if it is striped will do that to day and yes it is 1 down, 3 up

 

[matty_77]

Ive had bikes in the past that are really hard to find neutral due to the gear pattern. Let me know about the sprockets but

 

[in_deep]

i will let you know, but its fine in neutral once it's started

 

[in_deep]

Ive had bikes in the past that are really hard to find neutral due to the gear pattern. Let me know about the sprockets but

the the teeth on the front sprocket are fine