Need help with Electrics

[guinness_pride90]

I recently bought a Loncin 150cc upright engine, and the guy gave me a wiring loom (that he said fit something smaller like a 125 or something), a cdi which fit the loom, and an ignition coil.

I don't have a clue how to wire the engine up, this is what it's got:

Engine Harness 1 This should be the main harness i need

Green/Red - - Pink -- Blue/Red

Green/Black -- Yellow/Red -- Yellow/White

Engine Harness 2 Not sure what this harness is for

White/Red -- White -- White

Black/Red -- Black -------

Wiring Loom

I'm pretty sure all the solid greens are for ground.

I have no intentions of running a starter motor, battery, rectifier, generator, lights, indicators, horns, etc. I just want the engine to run with magneto and kick-start. I'm putting it in a gokart i'm building.

The wiring loom contains the following in order from one end of the loom to the other:

• 5 point male harness (for CDI i'm pretty sure), has Yellow/Black - Black/Red - Black/White - Green - Blue/White
• 4 point male harness - Red - White - Yellow - Green
• Ring terminal for Ground
• Ring terminal with fuse for Battery +
• 2 point male harness - Yellow/Red - Green
• 4 point female harness - Black/White - Green - Red - Black
• 4 male bullet terminals - Red/Black - Blue/White - Yellow - White
• 1 female Bullet terminal - Green
• another ring terminal for ground
• 2 female Bullet terminals (for Ignition Coil??)- Green - Yellow/Black
• 2 point female harness - Red/Yellow - Black
• 2 point Female Harness - Green - Black/White

Ignition Coil has a Green and a Black male bullet terminal, which should connect to the wiring loom, and the coil itself seems to ground out on the chassis with a bolt.

The CDI has a 5 point female harness.

The seller suggested i send it to an electrician to rig up, but i don't think that's necessary.

If someone had a electrical schematic to fit my engine, or the wiring loom?

I also need to know which wires on the engine (the 4 point male harness to CDI), connect to which bullet terminals on the Wiring Loom, as the colours on the engine are different to the loom.

Please help if you can in any way, thanks heaps.

Loom Top


Loom Middle


Loom End


Engine Harnesses

 

[Auzie_rider]

here is a wire diagram if this is any help

 

[Auzie_rider]

oops that didnt work just look at my pics i got one in there

 

[twisties]

check this, it might help

http://www.miniriders.com.au/forum/...how-wire-your-bike-kick-start.html#post200666

 

[guinness_pride90]

I've got spark now, i just had to fool around with wire combinations and ground the engine.

i looked on different mini site forums and they helped.