hey everyone
i have a pitpro 11o and i was changing carbi while i was changing carbi i have bumped out a few of the electrics and now have no spark to start does any one know the electrics pattern
all wires from the engine should go to the cdi, from the cdi two wires will be for the kill switch and the other two go to the coil, try that. If the kill switch wires are broken it should still run.
do you have any lighting etc?
out of the magneto there should be green to green\, red and black to red and black and blue and white to blue and white, if there is a yellow and white leave them also if there is a green and red wire do not hook it up to anything.