pitpro150xr problem

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
headmess try to explain a problem you have with your bike when you hardly speak english sorry for my English if its to hard for you to understand
 
yea the the mechanic at motorbike city ferntree gully will know what to do.

you're carby's a bit different to mine, just to clear up whether the choke's on or off, take your air filter off and look into the carby, now you can see the choke, is it open or shut?
 
when you play with the mixture screw do you also need to adjust the idle screw as well
 
theres a "how to" somewhere...

basically...screw the mix needle right in...then out 2 turns.

start it up and set the idle fairly high. not too high. let it warm right up. a ride helps fr this bit:p

then slowly turn mix screw out...if engine starts slowing down, screw it in, til its revving at the highest it has, a bit more it should start slowing down again.. then back it out by 1/8-1/4 turn. then re set the idle to a nice low putt putt putt. shouold about do it.

if its new be prepared to do it again after a few hours of riding...
 
cool!!! cheers headsmess I think I will at least burn 1 tank to see how it goes after and than I"ll try that!!
 
Back
Top