Letsride1
Member
- Joined
- May 9, 2021
- Messages
- 23
- Reaction score
- 4
iv got a pitsterpro z160ho 155z today i was riding and came to a stop and went to let the bike idle it died and then i kicked it over started it and revved it up a bit bad then went and let it idle and it died again and then went to kick it over and it wouldn’t start unless i gave it throttle and kept the revs up as soon as i wouldn’t rev it it would die i pushed it for about a hour home from where i was 
and then dropped the oil i didn’t see any metal shavings in their and it didn’t look like anything out of the usual but i have no compression like 90% of it is gone there’s just a tiny bit but can easily push it down by hand. am i needing to replace the piston or rings or what should i generally be checking for at attempting to rebuild it if that’s what i need to do is my first time properly tearing into the engine
and then dropped the oil i didn’t see any metal shavings in their and it didn’t look like anything out of the usual but i have no compression like 90% of it is gone there’s just a tiny bit but can easily push it down by hand. am i needing to replace the piston or rings or what should i generally be checking for at attempting to rebuild it if that’s what i need to do is my first time properly tearing into the engine
