siezed engin

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

FULL-ON

Well-Known Member
Joined
Aug 29, 2006
Messages
347
Reaction score
0
if you sieze an engin does it wreck the bore this isn't for my mini it for my yz125 I need a new top end and I found 1but the engin is siezed
 
depends what seized up if the bottom end bearing goes that can seize your piston an you most likely dont need a new bore a yz125 bore costs 570 new

id say the best way to know whats going on is to take the bore off an check the bore if there is scrathes then its fu#ked an see why it has siezed up
 
LOL...

You can get your barrel either re-plated (a hard coating in the barrel) or get it re-sleeved both options cost ruffly the same amount. EX with a sleeve your will have the availablity of oversize pistons if/when it seize's again.

Cost for both $350-400 for the instalation + the cost of a new piston
 
thinks hillz but my engin didn't size the top that I was looking at buying was sized thanks for the answer got what I needed thread closed
 
Back
Top