slick 50 Well-Known Member Joined Dec 9, 2007 Messages 79 Reaction score 0 Location frankston Dec 27, 2007 #1 hey guys , thinking of putting on a 1/4 turn throttle and i was wondering if you can use the stock throttle cable or do i need a special cable to fit the 1/4 turn jobby , cheers in advance , rick ,
hey guys , thinking of putting on a 1/4 turn throttle and i was wondering if you can use the stock throttle cable or do i need a special cable to fit the 1/4 turn jobby , cheers in advance , rick ,
no_crf50_here Well-Known Member Joined Oct 7, 2007 Messages 2,342 Reaction score 37 Location Brisbane, QLd Australia Dec 27, 2007 #2 did mine today, used same old cable...
ducar.r.spec Well-Known Member Joined Apr 30, 2007 Messages 1,735 Reaction score 0 Dec 27, 2007 #3 with certain 1/4 turn throttles u have to trim some of the coating off of the cable
darb110 Well-Known Member Joined Oct 1, 2006 Messages 645 Reaction score 0 Location Tassie!! Dec 27, 2007 #4 throttles can be a pain in the neck but just swap it over and see were your at.. make adjustments from there
throttles can be a pain in the neck but just swap it over and see were your at.. make adjustments from there
S simmo_24 Member Joined Nov 27, 2007 Messages 24 Reaction score 0 Dec 30, 2007 #5 just swap it over and see what happens, i had to extend my inner cable with mine, but some dont need it.
just swap it over and see what happens, i had to extend my inner cable with mine, but some dont need it.