the old sprocket questions

[500CC2STROKEMINIBIKE]

heres the dimentions of my one

The inside hole diameter is 111mm,
The bolt holes next to each other are 89mm apart,
The bolt holes across from each other are 126mm apart.

ill be interested if its the same size.

Cheers.

 

[wezza]

can you get a 19 tooth front sprocket for a ducar engine? would that size cause clearance issues?

Mate dont get a bigger front sprocket, that will just make your gearing lower.
Id ask these guys theyve probably got a cheap one.
http://stores.ebay.com.au/Cats-moto-Parts-Store

 

[500CC2STROKEMINIBIKE]

yeah im after some more speed, and better use of 1st and 2nd gear.

getting a 37 gives a similar ratio to going upto a 19 front.

 

[wezza]

yeah im after some more speed, and better use of 1st and 2nd gear.

getting a 37 gives a similar ratio to going upto a 19 front.

Yeh sorry mate i got mixed up there but I wouldnt go any bigger than 17 tooth front

 

[Thumpstar Pro]

Bendigo boy hey! Im also from bendigo do you own a pocket bike or just your pitty?

 

[500CC2STROKEMINIBIKE]

pocket bike as well but im gonna get rid of it soon

 

[tysons_201]

Used to be a bendigo boy myself
Now in good old Cohuna.

 

[500CC2STROKEMINIBIKE]

what part of bendigo thump?

 

[noidea]

Measuremeants (apprx)
bore, 55mm
hole spacing (adjacent), 50mm
hole diameter, 8mm
hole spacing (diagonal), 70mm

if your interested, $30inc postage to east coast, email me: [email protected]

 

[500CC2STROKEMINIBIKE]

Thanks for the offer no idea but its not going to fit on my bike.

 

[noidea]

no probs, anyone else after a sprocket let me know.

 

[Bradpit]

i need a rear sprocket for atomik motox too !

 

[Dreadful]

Ebay I think bruz