yet another question...? what do i do

[$heepy]

ok then. whats happening is. i have to have the front brake on to start my bike. i gets really annoying sometimes and i was wondering whether you can get rid of it.

it has a little solenoid that when you pull the front brake lever in it clicks on. can you remove that and have it still work some how.

or lastly would a motorbike shop be able to remove it?

 

[MasterSpoon]

should simply be a micro switch in your front master cylinder
you will probably find 2 wires coming out there somewhere
presuming its a close circuit setup not a open circuit setup you should be able to simply cut and join the two wires and then your good to go
(if your not sure if its a closed or open circuit system a multimeter will tell you in about 5 seconds)

 

[darb110]

yeh little back switch as materspoon said just pull the wires off and start you bike and if she goes without pullin you brake in your set and if not then join those two together