Search results

can any one tell me where i can get a high comp piston for a 140 lifan? i'm about to rebuild the engine in my motovert and want to bump up the compression to about 10:1. any tips on what parts to use would be good. i'll clean up the ports while i'm there

took it out charged it with a charger, tested with a muilty meter let it sit for a week rechecked. held full charge. if i wired the stator straight to the head lights would i have to do the twin output mod? i'm not really keen on rewiring the bike if i can just buy a bigger stator that will sort it

i have the same thing on my motovert but i have a good battery in it. is there a write up on checking the stator? i know nothing about charging on bikes but cars are easy as

changed the gearing today, it was a 39 on the back. it cruises ok at 80 now with the 17/35. i'm a big bloke (100kg) so i don't think it would push me if i went up in the front as well

hi there, i just got a motovert rx with a 140 in it. my question is what gearing do i need to cruise at at about 80 ks? its got a 17/37 sprocket (i think on it) and it does 80 but is reving high. i have a 35 rear to go on but i dont know if it will be enough.

only just got a pic. do i need to pull it off and apart for people to see?

mine don't have any bolts like that and is a single piston caliper

any one got the rear caliper off their bike right now? i just need a few pics of how the pads are held in. i have a caliper that has no pads in it and the retainer just doesn't look like it fits in to hold the pads. i didn't pull it apart so i dont know if its the right bits. the search i...

what happened to the pics?

well i got a kit off ebay. now i have a problem. half the wires change colour when going through the plugs but thats not the problem. my rec only has 3 wires going into it. its missing the red and in the wiring pics up here is wired to the lights (power/ charge) do i need to put this in and...

i have no idea, i haven't been on the coast long, i only got a bike to stuff around with my mates when i go back to the ACT till my 4x4 is on the road. but now i'm pretty keen on them. where are some good spots to ride on the coast? i don't mind having to travel if its legal

pbk i live in blue haven. where are you from?

just can't work out what you would be using them for? i can bunny hop my bike but not enough to do a rail or a good size ledge. i might chuck a set on and see what i can do

so what are you using them for? are you grinding stuff or just stuffing around with them?

pm me with what you think its worth

Well long story short is i got stuffed around by my brother in law and now i have 2 engines to put into my bike i'm building up. one is a stock loncin 125 that has served me well and still going strong the other is DDR 140 (all i can find on it) with a oko 28mm carby, goes pretty good. my...

thanks for that. got no idea about the output shaft, its just a cheap engine till i can get some thing bigger and better

what are these wires for? i have never had a bike with electrics before so i have no idea. any help would be good

thats it. now to find a cheap one if you can't do it to mine. edit: just found the bike i seen on ebay Motovert Rx 125 ROAD REGISTERED THUMPSTAR - eBay Other Road Bikes, Road Bikes, Motorcycles, Cars, Bikes, Boats. (end time 31-Jan-10 16:39:22 AEDST) might aswell go buy a full size bike...

i pulled up next to a guy today with a rego'd (number plates, lights and rego sticker) thumper. does any one know if its a bike that has been brought like that or has it been complied? i'd be pretty keen to set up my bike if it can be done. then you can ride it when ever you want.