Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Devin DeMarco

    new to the 110 world (crf110)

    Hi all! I’ve been in the 50 game for around 15+ years and never got huge into it, but did the simple mods like 88 kit, skid plate, pipe, +2 swinger and some bigger suspension. But seeing everyone with a 110 seems to be (or has been) the new craze. My 50 has been siting for the last 5-8 years...
  2. M

    Yx160 valves

    Hi all, I recently adjusted the tappets on my yx 160, 0.003 intake 0.004 exhaust. The valves were fairly tight and I had to loosen them off to achieve these readings. The motor has slightly more compression now which is great but it developed a slight ticking sound from the head/tappers, which I...
  3. china911

    daytona 190 valve clearance

    valves need adjusting on the 190 current inspection .0003 in -.004 ex what are you guys running .005 in - .007 ex or .005 in .005 ex ?
  4. S

    AJS CR3 Starting issues HELP!!!!

    Hi everyone! Bought a 2nd hand AJS CR3 for £100 off some guy who said valves were knackered. Took head off and valves look fine. Need to check valve clearances though. I eventually got it started but it wouldnt rev above 6k. Came back to it the day after and bike had fallen over in the...
  5. B

    arrrgh! help! motor won't start

    i'm hoping someone has some advice on this one for me. i pulled down the head and cylinder last weekend on my lifan 140. it was starting like a pig (taking 5-10mins of kicking the thing) but running fine once going so i figured there might be some issues with the valves not sitting completely...