125cc TDR TMX PRO AX.

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

125cc mad

Active Member
Joined
Oct 14, 2015
Messages
33
Reaction score
0
Location
New South Wales
Hey all.
So in my very first post i was asking for some help in regards to buying either an Atomik or TDR. Well i went the TDR based on cost and what i know about the frame and i get the bike next week... Can't wait.
But I need some help as to what is the best oil to run it on and also how to bleed the brakes.
Any help will be greatly appreciated.
 
I just run Castrol $29 for 4 litre's at Supercheap atm, or $13.70 for 1 litre, you should change it after running it in so don't use expensive stuff unless you really want to.
Run it in with specific Motorcycle mineral based oil.
Castrol Activ 4T Motorcycle Oil - 15W-50, 4 Litre - Supercheap Auto Australia
Castrol Activ 4T Motorcycle Oil - 15W-50, 1 Litre - Supercheap Auto Australia

You shouldn't need to bleed the brake's.
Make sure when fitting the wheels that you don't go squeezing the front brake, or pushing in the brake pedal before the wheel's are on and done up tight.

You can do it later if you want, change the brake fluid for better Dot 4 stuff


Check out this thread re running it in-
http://www.miniriders.com/mini-chat/38773-running-hard.html?highlight=running
 

Latest posts

Back
Top