BradZ_09
Well-Known Member
- Joined
- Dec 26, 2007
- Messages
- 291
- Reaction score
- 1
Havin a few probs with my rc.
Buggy drops heavily in revs then climbs again when accelerating, only occasionally
Exact symptoms on a video with a savage running HSN too lean
Was a tuning vid so im guessing i need to richen my HSN
And sometimes when i go 2 start my buggy, pull cord gets sooo tight it wont pull, then loosens up, and starts..
Think my throttle/brake servo is stuffed
It cant hold full brake or full throttle, it twitches and as a result, no brakes!!
And my idle is too high, so it will not stay stationary. It cant keep the carb slide open either, so buggy cant run at full potential, dont get me wrong its got some balls, but it would have soo much more if slide opened enough.!!
While im on it, i need to lower the idle, what way do i turn it so it lowers it??
Throtle trim is as low as it gets, if i change it my buggy revvs too high.
Help please!!!
And URGENTLY need to know factory settings for Force .25
Like fully closed then 3 or something turns one way.. I dont know help
What way is closed? Clockwise or Anti....
Buggy drops heavily in revs then climbs again when accelerating, only occasionally
Exact symptoms on a video with a savage running HSN too lean
Was a tuning vid so im guessing i need to richen my HSN
And sometimes when i go 2 start my buggy, pull cord gets sooo tight it wont pull, then loosens up, and starts..
Think my throttle/brake servo is stuffed
It cant hold full brake or full throttle, it twitches and as a result, no brakes!!
And my idle is too high, so it will not stay stationary. It cant keep the carb slide open either, so buggy cant run at full potential, dont get me wrong its got some balls, but it would have soo much more if slide opened enough.!!
While im on it, i need to lower the idle, what way do i turn it so it lowers it??
Throtle trim is as low as it gets, if i change it my buggy revvs too high.
Help please!!!
And URGENTLY need to know factory settings for Force .25
Like fully closed then 3 or something turns one way.. I dont know help
What way is closed? Clockwise or Anti....