M middleway Member Joined Jun 27, 2009 Messages 22 Reaction score 0 Nov 24, 2009 #21 Yeah, thats all there is, only 3 wires.
sean01 Legend Spanner Spinner Joined May 27, 2007 Messages 5,934 Reaction score 120 Location burpengary, brisbane Nov 24, 2009 #22 ok then you will need to replace the stator with one tht has a charge coil... and also get a magneto tool..
ok then you will need to replace the stator with one tht has a charge coil... and also get a magneto tool..
M middleway Member Joined Jun 27, 2009 Messages 22 Reaction score 0 Nov 24, 2009 #23 Sweet, thanks to everyone for all their advice
M middleway Member Joined Jun 27, 2009 Messages 22 Reaction score 0 Nov 24, 2009 #24 So its worth paying the extra money for the one with adjustable timing? NEW OUTER ROTOR KIT ADJUST TIMING 140cc 150cc 160cc - eBay, Other Cars, Bikes, Boats, Cars, Bikes, Boats. (end time 24-Nov-09 20:19:37 AEDST) And it will definetly power the lights? I will need a puller as well right? Is this a bolt in affair or do I have to time it and do I still need the voltage rectifer?
So its worth paying the extra money for the one with adjustable timing? NEW OUTER ROTOR KIT ADJUST TIMING 140cc 150cc 160cc - eBay, Other Cars, Bikes, Boats, Cars, Bikes, Boats. (end time 24-Nov-09 20:19:37 AEDST) And it will definetly power the lights? I will need a puller as well right? Is this a bolt in affair or do I have to time it and do I still need the voltage rectifer?
bulldog93 Well-Known Member Joined Dec 16, 2008 Messages 2,971 Reaction score 76 Location 2330 Singleton Nov 25, 2009 #25 No the timing will be fine.. The crank shaft has a woodruff key in it and a notch in the flywheel so you know where it goes properly. Here's a tut I done: - http://www.miniriders.com.au/motor-tutorials/25618-stator-replacement.html When you get it you'll see what as to be done. Its fairly simple. You can get the flywheel puller from DHZ: - DHZ Mini Moto - Flywheel Puller Stator Last edited: Nov 25, 2009
No the timing will be fine.. The crank shaft has a woodruff key in it and a notch in the flywheel so you know where it goes properly. Here's a tut I done: - http://www.miniriders.com.au/motor-tutorials/25618-stator-replacement.html When you get it you'll see what as to be done. Its fairly simple. You can get the flywheel puller from DHZ: - DHZ Mini Moto - Flywheel Puller Stator
DvDRip Mini Riders Legend Joined Jan 10, 2009 Messages 3,377 Reaction score 46 Location Melbourne Nov 25, 2009 #26 you will have to time it but that's fairly simple, you could just put in the middle setting and if it's still hard to start just retard it a bit. Yea It'll power lights, yes you need a regulator and yes it is worth the money
you will have to time it but that's fairly simple, you could just put in the middle setting and if it's still hard to start just retard it a bit. Yea It'll power lights, yes you need a regulator and yes it is worth the money