Atomik nitrous 150cc mid size

[MattC]

I have an atomik nitrous 150cc mid size and i have got a new spark plug and also cleaned out the carburetor and it still wont start does anyone have any clue what the problem could be

 

[dynamicgs]

Do your Valve clearances buddy... maybe check the fuel tap/tank isnt blocked... mines had that before...

 

[wakey]

valves would be my first point of call, the ones on my nitrous 150 always need adjusting

 

[my67xr]

do you have spark ?
pull the spark plug out, plu it into the lead, sit it on the head, kick it over
can you see it, or feel it while holding the plug ?

do you have fuel at the carby?
open the drain screw on the bottom of the fuel bowl, does it flow out nicely?

 

[my67xr]

and do you have a multimeter too ?
this will be needed to check the stator and ignition coil

silly question, but is your kill switch turned to start ?

 

[zwebx]

does it even have spark? get the old plug or take this plug out eath the bottom of the plug with the cap on and then kick it over and have a look

 

[MattC]

Thanks everyone i will try everything yous said

 

[motovert24]

Check if the coil wires came off, also unplug the killswitch and then try it