Bike wont start!

[Hussein.H]

Hey guys, my bike will not start. I have cleaned the carby and it still did not start. I checked for a spark on the plug and there is a bright blue spark. I cant think of anything else to do.

Thanks in advance

 

[Blender]

is your fuel old? is your line clogged at all? also have you checked your valves? if not set the inlet at 0.03 and exhaust at 0.04 if that doesnt work, maybe an electric problem? and not takin the pi**, but is the killswitch on? beleive me i've made that mistake and its left me wondering for hours, then i happened to see it and switched it on and it started first kick.

 

[xLOCOx]

^^^^ same!!!

 

[GooseMan]

lol, but he has spark, another silly question is the slide in the right way round?

 

[my67xr]

if not set the inlet at 0.03 and exhaust at 0.04

close again blender, but the clearances are- .003" inlet, and .004" exhaust


but i would be looking at the pilot system in the carby,
one of the gallerys on the airfilter side of the carby is blocked up?
either blocked pilot jet centre hole
blocked side holes in the pilot jet ?
or blocked hole in the carby where the pilot jet screws into ?

 

[Blender]

close again blender, but the clearances are- .003" inlet, and .004" exhaust

haha, i just cant get it can i? one day someones bike is gonna die because of me! hahaha

 

[Hussein.H]

Alright guys, thanks. Me and my dad are going to work on the bike Sunday.

 

[GooseMan]

best of luck buddy

 

[Hussein.H]

Hey guys, quick update. I found out what the problem was and fixed it. The floater in the carby was bent and it was blocking all the fuel. My dad helped me fix it and now it runs perfectly