Clutch Issues

[Rien]

Problem with my clutch... When I want to use my clutch... I have to bring the leaver back to about halfway in the middle of the grip before it starts working...
Just wondering how to adjust it...
I'm sure I could figure it out but I might screw something up like I always do...

Help would be great thanks guys..

 

[Cactus Jack]

Screwing the adjustment screw on the clutch lever perch OUT makes the clutch grab when the lever is let out further ... and screwing it IN makes the clutch grab earlier ...

Some clutch cables are adjustable in the middle so lengthening the outer cable makes the clutch grab when the lever is further out from the bars and vice versa ...

Start in gear engines with a cable adjuster down on the engine grab later when the threaded end of the cable is pulled forward (away from the clutch arm) by screwing the adjuster nuts clockwise ...

You've got the clutch lever play set spot on when you can blip the throttle and flick the clutch lever out quickly part way to jolt the bike then pull it back in WITHOUT stalling the engine ... But don't go doing that too much with chinese engines or you could break something ...