ilikemotorbikessoverymuch
Well-Known Member
- Joined
- Feb 26, 2011
- Messages
- 155
- Reaction score
- 0
Got a 2000 dual cab 3.0TD Hilux. Clutch is an exedy HD with about 50,000 on it, feels and worked great. Has new clutch fork and throwout bearing.
Few weeks ago i was driving and all of a sudden struggled to go into gear. I adjusted the pedal for more throw and it was all good again. Now its completely gone. I replaced master and slave and bled two whole bottles through! Still no go. When I first got the problem i remember driving at about 100ks and hearing a loud snapping sort of sound from what sounded like the front right, but thinking maybe the bell housing. (something snapped and flying around inside?) it sometimes happens pulling away in gear and even got it to do it one time by revving in neutral.
It seems like the clutch fork has moved back towards the slave cyl over the past few weeks if that helps.
Any ideas!?
Cheers
Few weeks ago i was driving and all of a sudden struggled to go into gear. I adjusted the pedal for more throw and it was all good again. Now its completely gone. I replaced master and slave and bled two whole bottles through! Still no go. When I first got the problem i remember driving at about 100ks and hearing a loud snapping sort of sound from what sounded like the front right, but thinking maybe the bell housing. (something snapped and flying around inside?) it sometimes happens pulling away in gear and even got it to do it one time by revving in neutral.
It seems like the clutch fork has moved back towards the slave cyl over the past few weeks if that helps.
Any ideas!?
Cheers