DPRO 160 Z160HO Oil

[domotox]

Hi guys
After a little advice.
I have a whole heap of oil there for my other bikes CASTROL 4T 10/40w and was going to use it in the DPRO but after reading the specs it recommends 20/50w mineral oil.
The only 20/50w mineral oil that I can find is for conventional 4 stoke motors not specifically for motorcycles.
Can anyone give me some advice on what they are running in there bikes or what to use in this.
Need to change it today

Cheers
Dom

 

[DHZ_XR8cing]

run the 4T mate. It will run all day every day on that.

 

[needapitty]

^^^x2 4t castrol

 

[domotox]

Cheers guys well changed it over to 4t 10/40 semi sythetic.

 

[DHZ_XR8cing]

Cheers guys well changed it over to 4t 10/40 semi sythetic.

A big no to any form of synthetic oil

 

[nickv1980]

say bye bye to your clutch pack

 

[reyan127]

Synthetic oil is very bad

 

[DHZ_XR8cing]

Synthetic oil is very bad

Syntetic oil is very good but in the china engines it a bit too tough on the clutch pack.

 

[domotox]

Syntetic oil is very good but in the china engines it a bit too tough on the clutch pack.

Cheers Guys
I have dropped the semi synthetic out and I will grab some non synthetic this afternoon.
I did not run the bike with it in so should be all good.

What about in the klx110 is it ok to run semi synthetic in that.