Help me! Stator Plate Wiring is different!

[Tig]

I'm siting here at someone elses house with a broken dirt bike. I accidentally blew off the stator pickup sensor.

I bought a new stator plate but one issue.. the connectors are very different. I don't know which ones I need to strip and replace.

Spoiler: Old Stator Plate

Spoiler: New Stator Plate

Spoiler: Dirt Bike Stator Plate connector

The problem is... the dirt bike stator connector only has 3 wires. Why???? Also, some wire colors are different.

PS: I'm sitting here literally on my iPod in the garage cause they aren't home. It's cold, help me fix this.

 

[mikkh]

Could you take few pictures of the cdi? Could you put the new and old stator plate next to each other and take a picture of that?

 

[my67xr]

I'm guessing you have a Lifan 150cc? and that it was running the original semi digital 8 pin CDI ?

Your new replacement stator came with a bigger flywheel and you have swapped all that over onto the Lifan 150 ?
Now you will need a new wiring harness to match your stator, and a new AC cdi



Your original outer rotor stator/cdi/flywheel




Your new stator/flywheel, with a white 3 pin plug on the end instead of 3 loose black plug/socket's

This is the harness and cdi you need to run with your new stator

Watch out starting the engine from now on if you have done the stator swap ^^, you will get big kickback and might break your kickstart gear's or worse, then engine case
Make sure you kick it over from just past top dead centre.

 

[Tig]

Actually I'm from this thread: http://www.miniriders.com/chinese-mini-s/41899-coolster-125cc-db214s-dead.html

You might remember me. However, I decided to wing it and figure it out based on only the wires in the bike connector(third pic).

The bike is operational and running fine. Now I see that it is possible to run headlights + a horn. Just not sure how to do it properly.

 

[thejshot]

I got this 150cc engine off gumtree and all the wiring was wrong this diagram help me get spark hope it helps.

Parts unknown