How to assemble front brake caliper on Atomik Nitrous 140?

[stipe]

hi guys,

Whilst the front wheel of the bike was off i had accidently squeezed the break locking it up. After prying the pads apart the smaller pad simple fell out, not being held in place by anything. So the entire brake is apart and i need to know how to reinstall it all. I have looked around for other posts but none of them help.

cheers.

 

[Cordogs]

There should be a small metal W shaped shroud that holds the pads in place, have you got that?

 

[stipe]

Yeah ive got that metal bracket its just hard to tell how it all goes back together.

 

[my67xr]

So was it the smaller disc pad from the wheel side of the caliper that fell out ?

 

[stipe]

Essentially i had to pry the pads apart as i had accidentally squeezed the front brake. after i managed to get them apart a little the smaller one fell out, then in my efforts to repair it i just pulled it all apart. Now i have no idea how it attaches with that metal clip.

 

[my67xr]

Post up some pic's, i'll try and explain it.
I dont have an Atomik single piston caliper here to do it for you.