Jialing 125cc in SDG Speed Mini Wiring Issues

[triple_a]

Hi Guys. I just put a Jialing 122cc in my SDG speed mini, and I have run into some problems. The SDG motor had 2 wires coming out of it, a black, and a white. The white one plugged into a white wire from the CDI. The black one plugged into a dual plug along side the killswitch wire.

The Jialing motor has a green, blue and yellow, and red and black wires coming out of it.

Does anyone know how I would hook this up? Or, do I need a new CDI?

I am new to all this. This is the 1st time I have replaced an engine!

Cheers.

 

[Dabomb]

the Jialing motor will use:

red, blue come from stator goto CDI.
green is earth, ground it to the chasis.
yellow is auxiliary coil from the stator, for lighting/battery charger circuit etc.
black from CDI is kill switch wire.

show me a photo of wires from ur cdi you want to use and wires coming from the jailing motor, then report back.

 

[bulldog93]

Try this but what Dabomb said is pretty much it:
- Hooper Imports Experts on Chinese Motorcycles and Parts, Engines

 

[triple_a]

Thanks. Hope these pics are ok! One pic is of the 3 wires coming out of motor. The other pic is of the dual connector that the killswitch is connected to.

The black wire coming out of the SDG motor was connected to the other part of this dual connector.

 

[triple_a]

This is a pic of the white connector that the white wire from the SDG was connected to.

 

[triple_a]

Thanks but I definately aint getting this.

Just so you know, I have not messed with the killswitch, or coil. They are still connected as they were.

 

[Dabomb]

righto bruv

red/black wire goto cdi.
Blue/yellow wire goto cdi.
Green is ground.


the kill switch and coil will be conected to the CDI.

where does the white wire come from?

got a photo of ur CDI? and wires going to it?

 

[triple_a]

Thanks mate. I have just learned that the SDG has an IRK. Does that make any difference?

 

[Dabomb]

yep, different setup.

 

[triple_a]

Pic of cdi

 

[triple_a]

Ok cool. I will buy a cdi tomorrow. Do I need a new coil aswell?

 

[Dabomb]

wont work, buy a standard, green plug, black body CDI.

 

[triple_a]

Ok Cheers. Do the wires from the engine plug straight into that? Forgive me for being dumb!

 

[Dabomb]

nah, u need a male plug for it too, should of been on the engine.

 

[triple_a]

I'll get one of those wiring harnesses(and a cdi), that should sort it out.

Thanks for your help mate