Hi guys, just wondering, i have a carby of a lifan 125 that always seemed to supply too much fuel to the 125 but was wondering if this carby would go ok on a yx 140, the old carby ( off the lifan) is a mikuni, all the things i read when i bought the lifan, ( in a dhz 125 2011 mod) says it a 26mm but the carby on the new yw140 looks heaps bigger. As i have said before i am having trouble with the yx140 running rough at about 1/4 throttle under load, i have done the valves, set them at 3thou inlet and 4 thou outlet, when i did them the inlet valve was a lot closer then 3 thou, thought that may have been the issue but it still does it, not as bad but still there.
Cheers
Cheers