Franky
Well-Known Member
- Joined
- Apr 21, 2006
- Messages
- 1,001
- Reaction score
- 0
The engines designed to go into the ProX frames are non any gear start motors, so the clutch arm is mounted on the side of the engine, hence away from frame,
The any gear start motors have the clutch arm mounted at the top of the motor resulting in it hitting the frame, by making a custom clutch arm mount you should be fine,
Franky
The any gear start motors have the clutch arm mounted at the top of the motor resulting in it hitting the frame, by making a custom clutch arm mount you should be fine,
Franky