Need Help...Quickly!

[matty06]

Well i got myself a stock crf50. Ive put on a Red Baron Bar Kit and thats all so far.

I just wanna know if this swingarm will fit on a stock frame with no hassle Pitboss Alloy Swingarm Motovert Thumpstar pitbike frame - eBay Other Makes, Bike Parts, Motorcycle Parts, Accessories, Cars, Bikes, Boats. (end time 22-Feb-09 11:59:47 AEDST)

Yeh i know ill have to run a china rear wheel but dont care...just interested to know if it'll fit with no hassle or not.

Also then what shock could i run on it? extended or watever?

Also will this raise the rear?

What Alternative could i run with stock forks to even it up? red baron hd for springs, "1 extended fork legs? dunno...give me a link

Also all china a frame swingers measure out the same right? not all differetn sizes

 

[SGONE]

yeah it will fit no probs..
they are around the same size as a +3 aftermarket swingarm..
you can still run a standard crf50 rear wheel with it..
+1 legs and heavy duty springs suit +3 swingarms(sits level)..
i got 1 of these swingarms they dont look the strongest but there cheap cheap

 

[matty06]

yeh im gonna run one on my stocka....still stronger then the stock swingarm

where can i buy +1 legs and hd springs from? and how much?

Also are all these china a frame swingers around the same size?

or do i buy that precise one or can i just wait and look for one later on?

what rear shocks can i run?

 

[unit_mx]

Yeh heaps and heaps of dudes have been runing them for year. Preety much the same as the 50 calibre swinga's.

The brake lug on the swinga works with the stock drum brake so you can just use the stock crf wheel and brake drum.

Get +1's , h/d springs , h/d bushings and tapered steering bearings. You can go cheap and buy it from brandx in the states and still get them sent here preety cheaply. Depends how long you can hold out , Im about to buy a fair few parts from brandxminis and have it sent over here , might be interested?

 

[unit_mx]

Yeh heaps and heaps of dudes have been runing them for year. Preety much the same as the 50 calibre swinga's.

The brake lug on the swinga works with the stock drum brake so you can just use the stock crf wheel and brake drum.

Get +1's , h/d springs , h/d bushings and tapered steering bearings. You can go cheap and buy it from brandx in the states and still get them sent here preety cheaply. Depends how long you can hold out , Im about to buy a fair few parts from brandxminis and have it sent over here , might be interested?

 

[matty06]

what about a a frame swinga like ur old mso one?

is it the same size and will it fit a stock 50 wheel like this one?

 

[mini mullisha]

dont do it them swingers are junk!!Stock crf50 swinger be heaps stonger than that,keep stock frame just get it strengthend!!!
Instead of buying crap just spend it on doing ya frame!!
Will thank me in the end ,or can just do it now?haha

 

[matty06]

nah i wanna make the bike abit higher and longer cheaply...

Plus many ppl say they strong..

even unit sed it.

unit:

what about a a frame swinga like ur old mso one?

is it the same size and will it fit a stock 50 wheel like this one?

 

[unit_mx]

nah i wanna make the bike abit higher and longer cheaply...

Plus many ppl say they strong..

even unit sed it.

unit:

what about a a frame swinga like ur old mso one?

is it the same size and will it fit a stock 50 wheel like this one?

I wouldnt stick the mso frame in it , too heavy and forks wont bolt in.

Just take your frame to a decent welder. Get them to cut the frame where it joins the head stock and run a pipe ( or bmx frame top or down tube ) inside your existing frame and get them to stich weld it all up. Then some flatbar , cut it in half and on an angle and get them to gusset it to the the head tube.

Mso swinga will need to be modified to take the 12mm axel but rest should bolt on fairly simple , same brake lug as that pitboss setup. But would weight more

 

[wogtaz ryder]

for 25 bucks go for it! , i got the same one i ran it on my 50 and had it on my china for ages and it seems heeps tough and good quality for a china part.

 

[matty06]

Also whats a nice cheap place in aussie where i can get , +1 fork legs, Hd fork springs?

Or even a nice cheap place in america? with good delivery prices!

I saw a shop in australia with the red baron bar kit at almost 400!!! isnt that crazy?

 

[steve101]

OZ50 >> Your XR50 & Z50 Specialists == -- __ is the best place they are in queensland i buy from them and postage to sydney is around $14.50 the bar kits are all expensive like all around the $300 to $400 mark thats just the way it is but you bought a honda so dont go cheap and put china parts on it you will be kicken your self later on when it all breaks