Pit Bike toolkit for bike

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

n_dorphin

Active Member
Joined
Feb 17, 2013
Messages
34
Reaction score
0
Heya Guys,

Thinking or making a tool kit for rides to keep on bike.
Prob mount on rear fairing or on front bars.

Any ideas if anyone makes these?

Cheers
 
I have a tool wrap like this that gets strapped to the front fender on the big bike for longer rides, my mate has one that has straps attached that hook onto the front/rear gaurd that is better that he got from ballards, holds alot more than you think when you see it rolled up
toolroll1.jpg
 
Stickers are handy if you half bust a plastic ;)

looks like a decent lil kit there devo!


Feel free to copy and add to sensibly as a basic guide

Minimum
"Backyard Basher"

Stubby metric spanners 8, 10, 12,13mm.
6 inch Shifter.
Pointy nose Vice Grips.
Allen key set
Screwdrivers (phillips and flat head)
Socket Set ¼ drive Socket Set in sizes 8,10,12, and 13mm¼ drive 4 inche long extension bar
¼ drive Adjustable T-Handle and ¼ ratchet
Roll of Electrical tape
ZipTies

"Weekend Warrior/Trail Blazer"
AS ABOVE
+ 3 emergency Puncture repair with tool
+ 2 Tyre valves with tool
+ 2 Permanent markers(Paint and felt tip)
+ 1 Hand pump
+ 1 Letherman Multi Tool
+ 1 notepad and pen
+ 2 cable locks with hex key
+ 1 Kneedit (metal putty)
+ 1 small packet of disposable wipes and plastic zip lock bags
+ 4 Water purifying sachets
+ 1 small assorted container,nuts bolts washers. (8,10,12, and 13mm)
+ 1 bag of assorted Zip Ties
+ 2 Emergency ponchos
 
Last edited:
Good list, I wrap elec tape around my socket extensions, takes up less room than a whole roll. Also cable ties are the the most used things for a bush fix for me(keep them in my bar pad), cable repair kit(for clutch/throttle/brake cable), spare gear lever is a must also(even the cheapest crappiest one you can buy), tyre levers, front tube(you can put a front tube in the back and it will work once inflated, not ideal but it will get you home), spare 2 stroke oil(if you ride a 2t obviously), spare plug and plug removal tool, about a metre of elec wire, and most importantly a roll of dunny paper in the back pack(nothing worse than wiping your ass with leaves!)
 

Latest posts

Back
Top