PLEASE HELP, front brake problem

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

makedonski

Well-Known Member
Joined
Mar 17, 2009
Messages
60
Reaction score
2
Hey guys, im not sure about if my front brake pads are meant to be touching the disc at all times when im not braking. i think its slowin down my bike. if i lift up my bike and turn the front wheel it doesnt roll easily. One push gives it about 1/4 turn.

What should i do?
 
what do you mean by bleeding it? and i need a front brake so.......... should i get a new disc or a new caliper. Can i somehow stop it from touching?
 
so your saying this will loosen the brake pads off my disc?
 
yes , your brake pistons aren't returing back to the initial position therefor rubbing on the disk. You have air in your system causing it to play up , bleed them out. If that doesnt work pull your caliper off the fork and pull your pads out and spray some lubricant into the pistons.
 
i am 100% you need to bleed your brakes and thay will work fine most of the time this is from pulling the brake in why the wheel is off
 

Latest posts

Back
Top