8 883 Member Joined Sep 1, 2009 Messages 19 Reaction score 1 Sep 29, 2009 #1 When putting a new head gasket in does it need to be loctited or anything ? or does it just sit in place? cheers Steve.
When putting a new head gasket in does it need to be loctited or anything ? or does it just sit in place? cheers Steve.
bulldog93 Well-Known Member Joined Dec 16, 2008 Messages 2,971 Reaction score 76 Location 2330 Singleton Sep 29, 2009 #2 Pretty sure you just place it and put some gasket glue on? Is that right.
Satchy Well-Known Member Joined Jul 18, 2008 Messages 224 Reaction score 3 Location South Adelaide Sep 29, 2009 #3 Gaskets a gasket, shouldn't need anything else other than a gasket.
sean01 Legend Spanner Spinner Joined May 27, 2007 Messages 5,934 Reaction score 120 Location burpengary, brisbane Sep 29, 2009 #4 make sure both head and barrel is dirt and oil free...
JML Well-Known Member Joined Apr 3, 2008 Messages 51 Reaction score 1 Sep 29, 2009 #5 883 check your emails i have just sent a reply to yor sms today the answer is no loctitie is need to hold the head gasket on
883 check your emails i have just sent a reply to yor sms today the answer is no loctitie is need to hold the head gasket on
headsmess Miniriders OG Joined Feb 9, 2009 Messages 1,520 Reaction score 15 Location sydney... north of Sep 30, 2009 #6 there should be two locating dowels in the cylinder...