mr_plow
Well-Known Member
- Joined
- Jun 22, 2011
- Messages
- 111
- Reaction score
- 2
i have a xy140 and a perimiter frame
i originally bent the clutch cable mount on the side of the motor so the clutch spline would clear the frame, it worked but the feel of the clutch sucks now because where the cable exits the tube its on a 45 degree angle and it rubs/catches on the tube.
so is it possible to rotate the clutch spline anti clockwise a little to give me enough clearance from the frame?
just wanted to check before i go dropping my oil and getting disappointed..
or is there a better method to go about this? i was considering welding up a bracket and tube
i originally bent the clutch cable mount on the side of the motor so the clutch spline would clear the frame, it worked but the feel of the clutch sucks now because where the cable exits the tube its on a 45 degree angle and it rubs/catches on the tube.
so is it possible to rotate the clutch spline anti clockwise a little to give me enough clearance from the frame?
just wanted to check before i go dropping my oil and getting disappointed..
or is there a better method to go about this? i was considering welding up a bracket and tube