TBR Z's

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

TBR

Member
Joined
Sep 4, 2011
Messages
7
Reaction score
0
G'Day,

TBR Monkey 2002
10" G-Craft Wheels Alloy (2.75")
Metzeler ME 7 Teen 120/70-10 (front)
Metzeler ME 7 Teen 130/70-10 (rear)
Honda Nice 154cc TJR (engine specs listed below)
Keihin 28PE / Stainless Steel Inlet Manifold (custom)
K+N Airfilter
Takegawa Front Sprocket
MAB Stainless Steel Exhaust (custom)
Takegawa Alloy Oil Cooler (custom)
Stainless Steel Oil Lines (custom)
Regina Gold Professional Drive Chain
Daytona Low Seat
Takegawa Short Alloy Rack
Kellermann Micro Indicators (front / rear)
Trelock Digital Speedo
Takegawa Front Brake Controls (black) / Alloy Lever
Takegawa Clutch Controls (black) / Alloy Lever
Takegawa Switchblock (black)
Takegawa HD Clutch Cable 910mm (black)
Daytona Quick Throttle (black)
Handlebar Alloy Screws (custom)
G-Craft Alloy Handlebar (foldable)
Shift-Up Headlight Brackets
Honda NSR 30mm Forks (shortened / modified)
G-Craft Alloy Tripple Clamps
Tapered Steering Head Bearings
Takegawa Fork Pre-Load Adjusters
Takegawa Steering Damper
G-Craft Fork Brace
G-Craft Alloy Fender (front)
G-Craft Alloy Headlight Brackets
G-Craft Brake Caliper Alloy Bracket (front)
Brembo 4-pot Caliper (front)
Braking Wave Brake Disk (front)
BBR Foot Brake Lever
Alloy Master Brake Pump Bracket (custom)
G-Craft Alloy Brake Fluid Reservoir (rear)
Honda NSR Brake Pump (rear)
G-Craft Brake Caliper Bracket (rear)
Brembo 2-pot Brake Caliper (rear)
Braking Wave Brake Disc (rear)
Stainless Steel Brake Lines (front / rear)
G-Craft Triple Square Alloy Swingarm +40mm (custom)
Öhlins Rear Shocks (fully adjustable)
Big Cedar Rear Alloy Fender (black anodized)
G-Craft Alloy Gear Lever (adjustable)
CF-Posh Alloy Rear Sprocket
Kickstand Stainless Steel (custom)
Fastway Performance Footrests
G-Craft Alloy Sidecovers (black anodized)
Takegawa Oil Catch Can (polished / clear anodized)
CF-Posh Battery Eliminator

Honda Nice 154cc by TJR Motorports Germany
*Takegawa cylinderhead Superhead + R (valves: IV 30 - OV24)
*Takegawa camshaft S35D
*TJR crankshaft with 58mm stroke
*TJR special piston 58mm
*Takegawa hydraulic dry-clutch (5 speed gearbox)
*TJR ignition lightened
*TJR special head gasket 58mm
*TJR special cylinder with a new cylinder sleeve 58mm
*Crankcase spindled for cylinder 58mm

TBR
Smoke 'em till the wheels fall off.....
 

Attachments

  • TBR1.jpg
    TBR1.jpg
    41.4 KB · Views: 44
  • TBR2.jpg
    TBR2.jpg
    45 KB · Views: 27
Last edited:
G'Day,

Jincheng Monkey JZ Replica with sidecar (2003)
100cc Zongshen Engine (tuned/modified) 4 gears
8" Wheels
Jincheng Hydro Front Fork with Disc Brake
Dual Exhaust Stainless Steel Exhaust (underseat)
22mm Mikuni Carb
K+N Airfilter
Manifold Inlet Stainless Steel (custom)
Alloy Oil Cooler (custom)
Stainless Steel Oil Lines (custom)
Finned Alloy Valve Covers
Seat Low Stainless Steel (custom)
Alloy Handlebar Screws (custom)
Regina Gold Professional Drive Chain
Sidecar Frame (adjustable) Stainless Steel (custom)
Sidecar Boat Stainless Steel (custom)
ADR Performance Rear Shocks 310mm (adjustable)

TBR
Smoke 'em till the wheels fall off.....
 

Attachments

  • sidecar1.jpg
    sidecar1.jpg
    70 KB · Views: 13
  • sidecar2.jpg
    sidecar2.jpg
    72 KB · Views: 18
  • sidecar3.jpg
    sidecar3.jpg
    45.2 KB · Views: 17
Last edited:
Nice to see you back on MG Butch. Hows the TJR go?

G'Day,

Goes like a bat out of hell.... brilliant engine in my personal opinion.
No probs at all so far, changing the oil and oil filter frequently.

Working on a few other big and small bikes in the moment but first priority is a 8" Monkey Supermoto for my son. Waiting on parts to arrive and custom parts need to be fabricated, test fittted and finished. A bikers work is never done....
 
Good to hear Butch. Would love to see a 154 TJR here in Australia. Maybe one day.
 
Good to hear Butch. Would love to see a 154 TJR here in Australia. Maybe one day.

G'Day,

My Honda Nice 154cc engine will come to Oz one day with all my other bikes, sooner or later, no worries.....

Finshed a custom Z50JZ bike with Aussie frame last year, sent to Sydney, got rego and a mate made an offer I could not refuse. He uses the Z mainly as game room deco.
 
I love the sidecar:thumbup:
My 4 year old wants me to build her one, so she can take her 1 y/o brother for rides. I don't think so... I'd want it for trips to the post office. My 195cc Z is a little spooky, balancing parcels on my lap.
 
cool bikes, the sidecar looks great, post more pics please. XxxX
 

Latest posts

Back
Top