Will a CRF50 / 70 Elka fit into a KLX110?

Mini Dirt Bikes & Pit Bikes Forum

Help Support Mini Dirt Bikes & Pit Bikes Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

qik160

Member
Joined
Oct 27, 2009
Messages
20
Reaction score
0
Location
Brisbane
Hey guys,

I am seriously thinkin about buyin the Elka from minimini on here but I want to be sure that it will fit into my KLX.

The Elka is for a CRF50 / 70 so it's 260mm eye to eye (same as stock length KLX)

The KLX still runs the stock swinger.

Cheers
 
measure your klx shock and if its 20mm wide at the eyes and 10mm eyes. it will fit if its same as that..
 
The Length of the CRF50 Elka of 260mm eye to eye will work but depends on the width of mounting it...

I just measured my CRF50 Elka for you and the bushes width on both ends measure to be approximately 22mm and that fits on my Billetware Cradle Frame and Sik50s +2" Swingarm...so best bet is to just measure up the width of your Stock KLX Eyelets! If there about 22mm you should be right ;)
 

Latest posts

Back
Top