M millzy555 Well-Known Member Joined Mar 12, 2014 Messages 72 Reaction score 0 Jul 24, 2015 #1 Chasing a manifold and intake boot/ adapter to suit my PE24. If anyone has one let me know Cheers
my67xr Miniriders Legend and Master Spanner Spinning Mode Joined Jul 29, 2010 Messages 11,982 Reaction score 79 Location South Australia Jul 24, 2015 #2 The OKO adapter's are 33mm/34mm I/D, and your Keihin PE24 should be 31mm O/D . I would think you could clamp the Oko adapter down enough to seal with the Keihin carby. Manifolder Rubber Adaptor | Buy Online Australia at DHZ
The OKO adapter's are 33mm/34mm I/D, and your Keihin PE24 should be 31mm O/D . I would think you could clamp the Oko adapter down enough to seal with the Keihin carby. Manifolder Rubber Adaptor | Buy Online Australia at DHZ
M millzy555 Well-Known Member Joined Mar 12, 2014 Messages 72 Reaction score 0 Jul 24, 2015 #3 Pretty sure i have one of those from the OKO 26 i bought a while back. Will see if i can get it to seal.
Pretty sure i have one of those from the OKO 26 i bought a while back. Will see if i can get it to seal.
my67xr Miniriders Legend and Master Spanner Spinning Mode Joined Jul 29, 2010 Messages 11,982 Reaction score 79 Location South Australia Jul 24, 2015 #4 Just make sure you don't over tighten it. Need to tighten it till the carby take's a little bit of pressure to turn it in the adapter.
Just make sure you don't over tighten it. Need to tighten it till the carby take's a little bit of pressure to turn it in the adapter.