zongshen fury
Member
- Joined
- Oct 26, 2010
- Messages
- 13
- Reaction score
- 0
hello, i have just recently brought a new engine for my bike,(zongshen 250cc pushrod air cooled) i have just sorta gone thrugh the run in prosess and changed the oil ect but last oil change i noticed the oil was greyish colour, it was quiet noticably grey to...what does that mean??? im using castrol activ 4t oil 15W-50...
story behind getting the new 250cc pushrod motor is i brought a atomik fury($200) off a guy and the motor had no compression so i pulled it apart and found that the timing chain had streched and skipped some teeth and screwed it all up and bent the inlet valve...so instead of hunting down a new T chain and inlet valve i just decided to buy a new zongshen PUSHROD engine so i wont have the problem of the timing chain streching again(hense why going PUSHROD), aparently its a common problem to happen...so i really hope the greyish oil in my new motor doesent mean problems..
story behind getting the new 250cc pushrod motor is i brought a atomik fury($200) off a guy and the motor had no compression so i pulled it apart and found that the timing chain had streched and skipped some teeth and screwed it all up and bent the inlet valve...so instead of hunting down a new T chain and inlet valve i just decided to buy a new zongshen PUSHROD engine so i wont have the problem of the timing chain streching again(hense why going PUSHROD), aparently its a common problem to happen...so i really hope the greyish oil in my new motor doesent mean problems..
Last edited: