jack's 110 build

[jackbmx2010]

Got a bunch of parts to start my build today : D. So far the fym frame, swingarm and bars have been resprayed gloss black and the tripple clamps cleaned up. New bushes in the rear shock and new headset bearings. also new swinga bolts. cheers to trent for hooking us up with most of the parts.

going on tomorro:
- white plastics with tall seat
- 12/10 wheels
- fym 110cc 3 speed engine with polished cases.
- other bling bits and pieces

Future plans:
- hand rear brake
- red millvilles
- pro taper bar pad
- sticker kit

 

[MiniFighter]

Well done, looking great already mate.

Keep the pics coming!

 

[jackbmx2010]

update for today:

engine 95% complete
wiring done
tank, front wheel, plastics on
new allen head bolts for shock and head covers
polished cases, fork uppers and bar clamps
metal plugs for end of sub-frame

motor all polished and painted up

still to do:

fix siezed bolt on motor stud : S
front brakes
paint fork lowers and switch them sides (brake on wrong side lol)
install and bleed front brakes
make new rear wheel spacers to fit and hook up drum brake and chain
fuel and oil cooler lines
start 'er up : D

give me your ideas for things i should/shouldnt do

 

[FMX_22]

looks good mate , what grapics u getting?

 

[jackbmx2010]

looks good mate , what grapics u getting?

Not sure yet. Thinking about some black and red sikspack ones I seen on eBay to go with my red bling bits.

 

[jackbmx2010]

update for today :

-rear hand brake made
-front brakes installed but still to be bled
-rear wheel spacers made and chain on
-timing cover and tappet covers cleaned and polished
-fork lowers painted

still to do:

-re attach loose engine stud
-heat wrap exhaust
-bleed front brakes and adjust rears
-make new exhautst bracket to re locate muffler (bottoms out on swing arm)
-make bracket for spring loaded chain tensioner

 

[jackbmx2010]

Update for the last week or so :

Motor stud re-attached and motor assembled
Footpegs on
Rear hand brake dialled in

Still to do:

Heat wrap exhaust, got some red heat wrap : P
Get a spark
Stop bars from slipping
Order graphics
Get some white rear number plates
Make bracket to mount oil cooler
New front tyre urgently needed

Progress is pretty slow since I'm back to school but will keep pics coming as things happen.

 

[jackbmx2010]

update for today:
bike is now running : D has a pretty major oil leak and alot of backfiring but at least it started lol

 

[largey]

Looking good man keen to see completed project

 

[jackbmx2010]

thanks. completion shouldnt be too far away hopefully

 

[jackbmx2010]

decided im not too keen on the current paintwork so im gonna strip and respray again. this time going with flat grey frame with red swingarm and red sub frame. hopefully make the bike stand out a bit more

 

[mattbombers]

decided im not too keen on the current paintwork so im gonna strip and respray again. this time going with flat grey frame with red swingarm and red sub frame. hopefully make the bike stand out a bit more

Lol sounds familiar

 

[jackbmx2010]

yeh i always liked that so since u changed im gonna steal it : P

 

[jackbmx2010]

Lol sounds familiar

i sent u a fb message about it before u posted

 

[logicquests]

Well done mate.

It looks good.

Is it just bits and pieces from a heap of different bikes or was there a bike there to begin with that you have added/subtracted to/from ?

Just interested.

Logic.

 

[jackbmx2010]

Well done mate.

It looks good.

Is it just bits and pieces from a heap of different bikes or was there a bike there to begin with that you have added/subtracted to/from ?

Just interested.

Logic.

I got it as heaps of parts but I think most of it was from the same bike. I googled the I'D number on the frame and it's a 04 or 05 model FYM 110cc

 

[jackbmx2010]

Update: stripped and done the new paintjob on the frame and swingarm and looks heaps better then the straight black

wanted to change a few bits and pieces after a few test runs so now have a stiffer rear spring, polished the centre engine casings and new silver head covers. Also changed the shock bushes and loc-tighted all bolts so far.

after soaking the layers and layers of paint off the ID plate i found out that the bike was originally a 2004 FYM fy110ey. If anyone knows anything about them ?

 

[jackbmx2010]

update: got the forks, bars and controls all in and hooked up. got the sprocket and rear rim cleaned up and front brakes in.

Should be getting paid in the next few days so a new pipe and graphics will be on the way soon

 

[jackbmx2010]

Update: Im finally satisfied with the finished bike and its lookin pretty good. Remembered to loctite all the bolts this time aswell after losing quite a few on the first test run.

finished polishing the motor. looks alot shinier in better light

Also got the hand rear brake sorted out. alot simpler to do than I thought as there was a unused hole right where I needed one and cost a grand total of $12.

The total cost of this whole project was about $350 so the wallet is fairly happy too. Let us know what you think : P

 

[mattbombers]

Fuk yeah all you need is some slicks haha Nar Archy is still fun on knobbys