scott_87
Well-Known Member
- Joined
- Sep 28, 2009
- Messages
- 50
- Reaction score
- 0
Hi all just wanted to see if anyone could help.
I have a pitpro 140cc running an oko 26 mm with a 96 main and I think 38 secondary, I've just recently put on a new lead but when changing the plug I seem to have threaded the spark plug thread in the head, I managed to start/created a new one by slowly screwing in a out.
But as you could get since then she hasn't been running right. I start it she idles high but I check the screws on side (both) play around with them she idles fine I cruise around with it but she misses and splutters big time. I then give it some and big back fires and flames.
My question is there anything else apart from head/spark plug that could causes this? And yes I've taken the carbie apart 3 times to clean.
I have a pitpro 140cc running an oko 26 mm with a 96 main and I think 38 secondary, I've just recently put on a new lead but when changing the plug I seem to have threaded the spark plug thread in the head, I managed to start/created a new one by slowly screwing in a out.
But as you could get since then she hasn't been running right. I start it she idles high but I check the screws on side (both) play around with them she idles fine I cruise around with it but she misses and splutters big time. I then give it some and big back fires and flames.
My question is there anything else apart from head/spark plug that could causes this? And yes I've taken the carbie apart 3 times to clean.