mudskipper
Well-Known Member
- Joined
- Apr 18, 2012
- Messages
- 102
- Reaction score
- 1
2012 motovert 160 had a rec reg kit installed by motobikecity in ferntree gully.
What a mistake!
Anyway, i have moved to perth and packed the bike away after they did the job.
They upgraded the stator where i am leading to the problem. When i kick it over, i dont ever see a decent output as it fluctuates, something i could give an accurate Voltage if the bike was idling
I have new CDI, new spark plug, new rectifier only outputting 9v, kill switch operates correctly, ignition coil resistance is correct, fuse ok.
I had the problem before replacing the above components after tracing out the wiring.
Any hints would be much appreciated as i have done all but found an answer on google or youtube.
What a mistake!
Anyway, i have moved to perth and packed the bike away after they did the job.
They upgraded the stator where i am leading to the problem. When i kick it over, i dont ever see a decent output as it fluctuates, something i could give an accurate Voltage if the bike was idling
I have new CDI, new spark plug, new rectifier only outputting 9v, kill switch operates correctly, ignition coil resistance is correct, fuse ok.
I had the problem before replacing the above components after tracing out the wiring.
Any hints would be much appreciated as i have done all but found an answer on google or youtube.