Search results

needleis set in the middle and i dont know what jets its running but it came off of another 125

hi, i am having problems getting a tdr 125 to run properly with a 26mm oval bore mikuni carb. when i slowly accelerate it just stalls and if i go full throttle it wont bog. it will just rev straight up so it is either on or off. i am not sure what the problem is. any suggestions what would be...

Actually was thinking maybe getting slicks. The tyres on it are stuffed anyway so that might be the go when I replace them.

i saw that just today. be interested to see if it actually works and what sort of power gains it would give

Update: Im finally satisfied with the finished bike and its lookin pretty good. Remembered to loctite all the bolts this time aswell after losing quite a few on the first test run. finished polishing the motor. looks alot shinier in better light Also got the hand rear brake sorted out...

touch the plug on the head and kick it over. you'll hear and see the spark

update: got the forks, bars and controls all in and hooked up. got the sprocket and rear rim cleaned up and front brakes in. Should be getting paid in the next few days so a new pipe and graphics will be on the way soon

Update: stripped and done the new paintjob on the frame and swingarm and looks heaps better then the straight black wanted to change a few bits and pieces after a few test runs so now have a stiffer rear spring, polished the centre engine casings and new silver head covers. Also changed...

I got it as heaps of parts but I think most of it was from the same bike. I googled the I'D number on the frame and it's a 04 or 05 model FYM 110cc

i sent u a fb message about it before u posted

yeh i always liked that so since u changed im gonna steal it : P

decided im not too keen on the current paintwork so im gonna strip and respray again. this time going with flat grey frame with red swingarm and red sub frame. hopefully make the bike stand out a bit more

thanks. completion shouldnt be too far away hopefully

update for today: bike is now running : D has a pretty major oil leak and alot of backfiring but at least it started lol

cheers man, you were spot on. thanks

ok ill give it a try

try this - YouTube - Pitbike brake bleeding

also forgot to add. the black and yellow going to the kill switch goes into a connector then the black and black with white stripe wires continue to the kill switch

hey guys and girls, i cant get a spark out of my new bike, a fym 110. ive tryed with 2different spark plugs and 2 cdi's but still nothing. ive searched here and google but all the digrams i could find are really confusing or the colors are all diffrent. this picture is what ive got atm...

Looks good lower in the rear I reckon. Mines the same. Lookin awesome though, good work